> Exhaust Gasket
> Cylinder Head Gasket
> Exhaust Mainfold Gasket
> Exhaust Pipe Gasket
> Gaskets
> Compression Sheets
> Braided Packings
 
 Do you want to know more about Zinotak?
detail>>
Contact us
Add:Kandun Street,Cixi,Zhejiang,China
Tel:0086-574-63281040
Fax:4008266163*01620
Website:www.zinotak.com
Email: sales@zinotak.com           service@zinotak.com
Home >>Reinforced Non-asbestos Sheet With Tanged Metal (ZT-S301)>
Reinforced Non-asbestos Sheet With Double Faced Metal (ZT-S302)

Constaruction:
ZT-S302 is made by materials of three cascades. An non asbestos beater sheet is inserted into a convexo-plane metal frame, such as 0.18-0.25mm tinplate /carbon steel or 0.1-0.15mm 304ss /316ss. It is produced by specially pressing and sticking process. This kind of sheet is be seized of the characteristics such as good compressibility and resilience, small stress relaxation, fine compensation function for uneveness of sealing surfaces and long working life.

Normal Style:

ZT-S302/304
ZT-S302/316
ZT-S302/other tanged metal material

Application:
Cylinder head gasket and in/ex gasket for machinery or equipmet such as Automobile e-ngine,
motor cycle engine, diesel, internal combustion engine etc.

Technical Data:

Max temperature

450°C

Max Pressure

35.0MPa

Compressibility

15+/-5%

Strss Relaxation

<=45%

Recovery

>=45%


Media:

Steam,mineral oils,heat transfer oil,hydraulic oil,fuel, water, seawater, freshwater.

Benefit:
Permanently elastic,even in hot-cold cycles over the entire temperature range,noagin no brittleness,
no hot or cold flow,long time uniform compressibility and r-esiliency independent of temperature.

Dimension:
500 x 1000 x 1.0~3.0MM
500 x 1500 x 1.0~3.0MM
1000 x 1000 x 1.0~3.0MM
1000 x 1500 x 1.0~3.0MM
Special denstiy ,thicknes or insert material are avaliable to request.

Back: Reinforced Non-asbestos Sheet With Tanged Metal (ZT-S301)
Next:no
Copyright 2003-2012 © Cixi Zinotak Sealing Manufacture Co.,Ltd.   All Rights Reserved   Tel:86 574 63281040    Fax:86 4008 266163-01620
浙ICP备17050986号